A picture

OXYGEN LANCE HOSE

PART # DESCRIPTION
HL1/2X50C Lance Hose 1/2” id X 50 feet long with CGA “C” fittings
HL1/2X75C Lance Hose 1/2” id X 75 feet long with CGA “C” fittings
HL1/2X100C Lance Hose 1/2” id X 100 feet long with CGA “C” fittings
HL1/2X150C Lance Hose 1/2” id X 150 feet long with CGA “C” fittings
HL3/4X50D Lance Hose 3/4” id X 50 feet long with CGA “D” fittings
HL3/4X100D Lance Hose 3/4” id X 100 feet long with CGA “D” fittings
HL3/4X125D Lance Hose 3/4” id X 125 feet long with CGA “D” fittings
Oxylance Inc. recommends minimum of 1/2” hose for all burning bar applications.

 

IF 3/8” HOSE IS USED IT MUST BE A SINGLE RUN OF HOSE WITH NO SPLICES OR CONNECTORS THAT WILL RESTRICT THE OXYGEN FLOW. REPAIRING 3/8” HOSE OR JOINING 2 SECTIONS TOGETHER WILL REDUCE THE FLOW TOO MUCH FOR THE BURNING BAR TO OPERATE PROPERLY. WE WILL NOT BE RESPONSIBLE FOR BURNING BAR PERFORMANCE IF USED WITH 3/8” HOSE.

 

PART # DESCRIPTION
HL3/8X25B Lance Hose 3/8” id X 25 feet long with CGA “B” fittings
HL3/8X50B Lance Hose 3/8” id X 50 feet long with CGA “B” fittings
HL3/8X75B Lance Hose 3/8” id X 75 feet long with CGA “B” fittings
HL3/8X100B Lance Hose 3/8” id X 100 feet long with CGA “B” fittings
HL3/8X50C Lance Hose 3/8” id X 50 feet long with CGA “C” fittings
HL3/8X75C Lance Hose 3/8” id X 75 feet long with CGA “C” fittings
HL3/8X100C Lance Hose 3/8” id X 100 feet long with CGA “C” fittings