REGULATORS WITH PART NUMBERS ENDING IN "B", "C" OR "D" COME WITH A CGA OXYGEN FITTING TO MATCH THE HOLDER AND HOSE.
OXYLANCE HIGH FLOW REGULATOR
The Oxylance REG-5-250 regulator was designed specifically for 1/2” hose and high flow requirements. This single stage regulator has a 1/2” npt port on the output side so it can be used with 1/2” or 3/4” hose without the flow restriction of a standard regulator with 1/4” npt output. From a high pressure cylinder this regulator will flow in excess of 10,000 scfh.
NOTE: THIS REGULATOR IS FOR HIGH PRESSURE CYLINDERS ONLY, NOT FOR USE WITH LIQUID OXYGEN
|250 PSI OUT||250 PSI High Volume (10,000 cfh) 1/2” npt Outlet Port|
|REG-5-250||250 psi Regulator npt female outlet port (no outlet fitting)|
|REG-5-250 B||250 psi Regulator with CGA “B” fitting for 3/8” hose|
|REG-5-250 C||250 psi Regulator with CGA “C” fitting for 1/2” hose|
|REG-5-250 D||250 psi Regulator with CGA “D” fitting for 3/4” hose|
HIGH FLOW MANIFOLD REGULATOR
The Manifold regulator can be used with either liquid oxygen or high pressure cylinders. This high volume regulator has 1/2" inlet and outlet ports. The regulator is available as either a manifold regulator (as pictured) or with a CGA 540 nut and nipple for high pressure cylinders.
NOTE: THIS REGULATOR CAN BE USED FOR BOTH HIGH PRESSURE CYLINDERS AND LIQUID OXYGEN
|REG-6700||High Manifold Regulator|
|REG-6700-C||High Manifold Regulator w/ CGA "C" fitting|
|REG-6700-D||High Manifold Regulator w/ CGA "D" fitting|
|REG-6700-540-C||High Manifold Regulator w/ CGA 540 Inlet and "C" fitting out|
|REG-6700-540-D||High Manifold Regulator w/ CGA 540 Inlet and "D" fitting out|